Everybody maintains their own individual piece of advice on the subject of What Would Cause My Electric Water Heater to Stop Working?.
Many modern homes make use of an electrical hot water heater for their furnace, as a result of its comfort as well as simplicity of use. However, just like any other electric devices, troubles might occur with its usage, unexpectedly. It can be actually discouraging to get up to a cold shower instead of a warm one or having your bathroom with water that isn't hot enough or even also warm. Whatever the situation might be, water heater problems can be fairly stressful. Thankfully, we've made a checklist of possible solutions to your hot water heater concerns. There are a number of factors that might trigger a lot of these troubles, maybe a concern with the power supply, the electric heating element, or the thermostat. Before doing anything, guarantee you switch off the primary power supply for security. Whatever the problem is, getting it dealt with need to not present excessive of an issue if you adhere to these actions:
Call An Expert:
If after replacing all damaged parts and resetting your temperature level, the hot water heater still isn't working, you might require to get in touch with an expert plumber for a specialist viewpoint. The problem with your heating system could be that the cold and hot taps have actually been changed or it may be undersized for the quantity of hot water needed in your house. Whatever the case might be, an expert plumber would aid resolve the problem.
Examine Your Power Supply:
As basic as this might seem, it is very needed. Without sufficient power, your hot water heater will not function. So the first thing to do when your water unexpectedly stops working is to validate that it isn't a power issue. Examine if the fuse is blown out or the breaker tripped. If the breaker is the concern, just transform it off and on once again. Change any type of busted or worn-out fuse. Check the device with power after these modifications to see if it's now functioning.
Check Your Thermostat:
If your hot water heater still isn't working or the water appearing isn't hot enough, you might need to examine the temperature setups on your upper thermostat. Make sure the circuit breaker is switched off prior to doing anything. Open up the access panel as well as press the red switch for temperature reset above the thermostat. This need to help heat up the water. Transform the breaker back on and inspect if the trouble has been dealt with.
Inspect the Burner in the Water Heater:
If it's not a power problem, then attempt checking out your heating element if it is still working. Check each of your burner to be sure the issue isn't with any one of them. If any one of them is faulty, replace that part and after that inspect whether the warm water is back on.
Verdict
Water heater problems are not always significant. Much of them result from minor issues like a blown fuse or worn-out burner. Replacing the defective parts ought to work. Nevertheless, if you are still not able to resolve the issue, give a call to your closest plumber to find to get it repaired.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
Do you really like reading about No Hot Water — Water Heater Repair? Post a remark directly below. We would be delighted to hear your reactions about this piece. We hope that you visit us again before long. If you enjoyed our blog entry please make sure you remember to pass it around. Kudos for your time. Kindly pay a visit to our blog back soon.
Book Appointment